DJI A2 Flight Control System for Multi-Rotor Aircraft CP.WK.000027

(No reviews yet) Write a Review
SKU:
DJIA2FC
UPC:
695826511009
Condition:
New
Availability:
*Please be advised that orders may take 1-2 business days for processing before shipping.
MSRP: $539.00
$499.00
— You save $40.00

Description

PRODUCT HIGHLIGHTS

  • Main Controller IMU GPS and PMU
  • For Quad Hex and Ocoto-Rotor Aircraft
  • Intelligent Orientation Control (IOC)
  • Point of Interest (POI)
  • Intelligent Landing Gear Function
  • Return to Home Failsafe
  • One-Motor Fail Protection
  • Receiver Supports Futaba FASST/DJI DESST

The A2 Flight Control System for Multi-Rotor Aircraft from DJI provides the autonomy that four six and eight rotor aircraft require for stable flight. The A2 breaks down into five main components: the MC (main controller) with CAN-Bus hub and receiver IMU GPS PMU and LED. The IMU GPS and PMU provides the MC with altitude acceleration location orientation and other data which gets combined with any pilot instructions and translated into motor response. The system supports Quad I Quad X Hex I Hex V Hex Y Hex IY Oct X Oct I and Oct V motor mixes. The included receiver is compatible with Futaba FASST series and DJI DESST series transmitters.

A2 Flight Control System

      The A2 flight control system is comprised of the main controller IMU GPS PMU and Bluetooth LED indicator


Main Controller
      The aircrafts equivalent of a CPU. The main controller takes pilot input and factoring in data from the IMU GPU and other sources instructs the ESCs at the motors. In addition the A2 main controller incorporates a 2.4 GHz DR16 receiver which is compatible with Futaba FASST series and DJI DESST series transmitters (radio controllers). To connect peripherals the main unit features a CAN-bus terminal with 12 output channels 


IMU
      The IMU or inertial measurement unit is the primary source of information used by the flight controller so that the aircraft can maintain a stable flying condition. It uses a combination of accelerometers and gyros to collect this data 


GPS
      The GPS allows the aircraft to keep track of where it is in two-dimensional flight. This enables various types of assisted flying not otherwise possible such as keeping the aircraft in a fixed hover while shooting video. A high gain antenna mounts on the end of a stock installed on top of the frame 


PMU
      The power management unit (PMU) regulates power being fed to the flight controller and other components. It features voltage detection and alarming and has an extendable CAN-bus port 


LED Bluetooth Indicator
    The LED-BTU-I module provides the USB and Bluetooth connectivity required so you can adjust various flight control parameters using a computer or mobile device. Bluetooth wireless communications can be extend using the 2.4G Bluetooth Datalink which relays Bluetooth data over 2.4 GHz Wi-Fi for use with the iPad Ground Station a waypoint-based autopilot mapping system
Intelligent Orientation Control (IOC)
On multi-rotor aircraft-- as with airplanes--pressing forward on the transmitter (radio controller) moves the nose forward. However because multi-rotors are largely symmetrical it can be easy to lose track of which way the nose is pointing causing the controls to become counter-intuitive. To avoid this IOC--when enabled using the assistant software--defines movement relative to the pilot so that for example pressing forward will always result in the aircraft moving forward from the pilots perspective
Point of Interest (POI)
When the GPS signal is good users can record the current position of the aircraft as a point of interest by a preset switch on the transmitter (radio controller). The aircraft can achieve a circling flight around the point of interest with the nose pointing at the POI in an area of 16.4 to 1 640 radius when the roll command is given. This function is ideal for shooting of a fixed or stationary object creating an aerial tracking shot
Intelligent Landing Gear Function
Once you enable the Intelligent Landing Gear function in the assistant software the landing gear will default at the lower position when the aircraft is on the ground. The system will also lower the landing gear in an emergency the event of motor failure or on auto landing to protect the aircraft and gimbal. You can lower or retract the landing gear using a switch when the aircrafts altitude is over 16.4 from the ground
Return to Home Failsafe
Assuming the GPS has been properly calibrated and enough satellites are available the aircraft will automatically return to its home point in the event contact with the transmitter (radio controller) is ever lost 

It is also possible to assign a button using the assistant software that when pressed will cause the aircraft to automatically return to the home point
One-Motor Fail Protection
Available when the aircraft is in attitude or GPS attitude mode. In the event one motor fails the aircraft can maintain a stable flying condition enough that it can safely be brought back home and landed

 

What's In The Box?

 

  • LED-BTU-I LED Bluetooth Indicator for A2 Flight Control System
  • MC for A2 Flight Control System
  • PMU for A2 Flight Control System
  • GPS Bracket for A2 Flight Control System
  • IMU Module for A2 Flight Control System
  • GPS-PRO Module for A2 Flight Control System

 

View AllClose

Additional Information

MFR#:
CP.WK.000027
UPC:
695826511009
Weight:
0.00 lbs
View AllClose